This is a handmade pendant created from a material sheet made by a manufacturer who handles base metals, commissioned by artisans. The sheet was pressed with an 18-karat gold wire onto a white gold plate to create a two-tone design. The pendant features a very voluminous ribbon shape, suitable for an individual exhibition. Additionally, the remaining parts of the sheet were used to create a one-of-a-kind pendant idea.

The craftsmanship includes hand-welding (soldering) for the part where the necklace passes through, as well as setting each diamond stone individually by removing parts of the plate. From the back side, even the small diamonds, each of different sizes, reaffirm their status as natural stones. This piece is unique in the world, and you can feel the warmth of handmade work.

Overall length: approximately 2.9 cm
Maximum width: approximately 7 mm
Total weight: approximately 1.87 g
Diamond weight: 0.19 ct

The part where the necklace passes through is about 5 mm, making it compatible with thicker necklaces or omega-type chains.

The quality of the diamonds is rated as B for this pendant. Under 10x magnification, inclusions and natural scratches are easily visible, but they are difficult to see with the naked eye. The diamonds are set on a white gold base, and most are nearly colorless.

There is a photo showing the lower part of the stones protruding, but the plate has been curved to prevent direct contact with the skin during wear.

*Necklace is sold separately.

Country of manufacture: Japan